25CM 350W Electric Pottery Wheel Machine For Ceramic Work Clay Art Craft Molding. Our electric pottery wheel machine is suitable for most users and scenarios such as school, clay bar and etc.
You can easily use it but please pay attention to users manual to ensure your safety while using. This wheel machine has a beautiful appearance, whose surface is processed by powder coating. It has compact structure, and will not occupy much room. Convenient to operate, good performance when preventing clay from splashing out.
The wheel rotates smoothly, with low noise, and rotation direction can be switched clockwise or counterclockwise. Single-phase three-wire connection with earth leakage protection device, safe and reliable operation. Noise Amplitude:Less than 60dB. Electrical Machinery:Advanced Brushless Electrical Machinery. Check the stability of machine before use.If the machine is not stable, you need to adjust to the bottom of the lift feet, after the machine is stable, in connection with the power supply. When the device is connected to the power supply, push the leakage protector to the ON button and turn the forward or reverse switch.
Don't press the turntable with your hands while the machine is running. You can't switch the forward/ reverse switch in an instant when the machine is running until the machine is completely stationary.Do not pour a large amount of water into the basin. Once a large amount of water is poured into the basin, the electricity will be cut off in time to clean up. Students and children must operate under professional guidance. Power off and clean the machine in time after it is used. As different computers display colors differently, the color of the actual item may vary slightly from the above images. Please allow 1-3mm differs due to manual measurement. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.
If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.
Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
We are always happy to answer your questions or resolve any issues you might have with the item you order. Questions will be answered within 48 hours normally. There is time difference, so please give us a little more time to help you. Your feedback is critical to our success!The item "350W 110V Electric Pottery Wheel Ceramic Machine 25CM Work Clay Art Craft DIY US" is in sale since Thursday, July 9, 2020. This item is in the category "Crafts\Sculpting, Molding & Ceramics\Ceramics & Pottery\Pottery Wheels".
The seller is "factoryselling100" and is located in California. This item can be shipped to United States.